What Is The Proper Way To Move A Pool Table?

What Is The Proper Way To Move A Pool Table?

Feb 24, 2023 Do you know that more than 2,500 Australians face injuries caused by lifting or toppling large furniture pieces during relocation? Sprains and strains are the most common physical injuries that can ruin your entire excitement of a house move. The most difficult part is to relocate a pool table. A pool table is one of the heaviest items that need a proper strategy to move through doorways, entryways and stairs. It can be 7 to 9 feet long and weigh around 700 to 800 pounds. For instance, an 8-foot pool table with a slate top can weigh 1000 pounds. Thus, you need a proper plan to move a pool table without causing any damage or injury. You can also safely move a pool table with the help of removalists Sunshine Coast. They bring all the necessary supplies and make your life a bit easier. However, if you want to know a DIY way to move this bulky table without any chaos, read the following tips and tricks:

1. Stock Up on Necessary Moving Supplies and Tools

Start the process by arranging necessary moving supplies and a toolkit to help you easily disassemble a large pool table. All you need is:
  • A screwdriver
  • A power drill
  • Socket Wrench
  • Moving blankets
  • Staple remover
  • Packing paper
  • Bubble wrap
  • Packing tape
Tip: You can also use old towels and sheets to provide extra cushioning to the edges of your pool table.

2. Ask for Help to Pack and Lift Heavy Furniture

You need assistance to lift, move and load heavy furniture like a pool table. So, if you are not hiring professionals, you need to ask for help from your friends and relatives. At least 4-5 persons are required to lift a 1000-pound pool table. Ask your friends and family members who can help you voluntarily. It is good to wear proper shoes, comfortable clothes, etc. Hiring the best removalists Sunshine Coast is recommended if you have narrow entryways or staircases. They know how to move large items with extreme care and precision.

3. Measure Entryways and Doorways

Disassembling and moving a pool table requires attention-to-detail planning. You need measurement if you want to move your table carefully through your doorways and stairs. Yes, measure all doorways, hallways and staircases that the item needs to pass through. This will show you how easy it will be to move a heavy table without causing any damage. Before starting the process, open the doors and protect your floors and walls. For that, you need thick towels or baby proof-bumpers for sharp edges.

4. Start Disassembling Your Pool Table

This is one of the most pivotal steps to prevent back injury or joint pain. Taking a pool table apart or disassembling can make your job a lot easier. You need to take apart the legs, rails, felt and slate for a smooth relocation. When hiring professionals, they bring furniture sliders to move heavy furniture without disassembling it. However, it is good to take apart and pack each and every part safely. Make sure you read manual instructions for specific disassembling and reassembling of large furniture pieces like a pool table. You can use different packing and cushioning materials while wrapping dining chairs, pool table and other furniture when relocating home.

5. Remove Ball Pockets and Rails

According to professionals, removing the ball pockets of a pool table is important. These are usually attached with either staples or screws. Take out the screws with the help of a screwdriver. Once the pockets are out, remove bolts in the side rails using a socket wrench. Pack pockets and rails in a plastic zip bag and label them.

6. Take Apart Felt and Slate

The slate is one of the delicate parts of a pool table. Make sure you remove it safely and securely. Use a staple remover and take out the felt. Do not tear it during the disassembling process. After that, you will see a stale. Use a drill to unscrew it without causing any damage. Lift the slate out and set it against the wall. It can weigh around 400 pounds or more. So, it is good to ask your friends to assist you in lifting the slate. This is one of the best ways to save money on a house move, especially if you are running low on budget.

7. Remove the Legs Of your Table

This step is about taking off the legs of a pool table. You must turn the table frame upside down and evenly distribute the weight to avoid breakage. After that, unscrew the legs from the frame using a drill. You may need to read the manual’s instructions to get the job done properly.

8. Pack Removable Parts and Label them

Before moving removable parts, make sure you protect them from getting chipped or scratched during the process. So, pack each rail, leg and pocket in bubble wrap. Pack the slate in moving blankets and secure it with packing table. Label all the parts using a permanent marker. Load it onto a dolly and transport it to the moving van.

9. Lift A Pool Table Carefully

This is one of the heaviest furniture pieces, and that’s why you need either professional removalists Sunshine Coast or proper lifting techniques. The slate can easily be cracked, or you may damage the floors or walls of your house. So, here are some quick hacks to prevent injury when moving furniture:
  • Make sure you have at least 4 people to assist you in the process
  • Use furniture straps on heavier areas of the table
  • Wear slip-resistant shoes
  • Load slates with proper care and attention
  • Secure the parts of your pool table with straps after loading them into the truck.

Wrapping up

Moving a pool table requires proper planning and preparation. You can follow these tips to prevent breakage, personal injuries and property damage. With proper disassembling, you can protect its delicate parts, screws and bolts and re-assemble them in a new house in Sunshine Coast, QLD with ease.